top of page

3D Printer Spare Parts 

500x500 520x520 mm silicon heater AC fo

520x 520 mm Silicon Heated Bed for 3D printer

  • 520 x 520 mm size

  • 1000 watt, 240volt AC supply,

  • 2-meter wire length

  • with a pocket for the sensor

  • without adhesive (can be sticked to surface with any silicone sealant available in the hardware store)

  • Max Temperature 150C

From:

₹ 7800

Book Now
Upgraded ender 3 Cr10 hotend setup .jpeg

Upgraded Ender 3/Cr10 series printers Hotend Setup

Upgraded hotend setup for Ender 3 and Cr10 series machines. 

This hotend comes with inbuild PTFE lining that will make the printing process 3 times more reliable and high-quality prints.

No more heat creep/ nozzle clogging issues after replacing with this hotend setup. 

From:

₹999

Book Now
Brass nozzle for 3d printer in india hyd

Brass nozzle for 3D printer

Cr10/ Ender 3 and MK8 series compatible high-quality brass nozzle

.25, .4, .6, .8, 1.0 mm nozzle diameter sizes available with us. 

From:

₹ 70

Book Now
100k-ohm-ntc-thermistor-for 3d printer f

100K Thermistor for 3D printer Cr10/Ender 3 series

  • 100K ohm thermistor

  • With 2 pin connector 

  • Used in the majority of 3D printers like Cr10 and Ender 3 series printers

  • 3D printer spare part for measuring temperature 

From:

₹ 110

Book Now
24 volt heater catridge for 3d printer r

24V Volt Heater Cartridge for 3D Printer 

  • 24 Volt 

  • 40 Watt 

  • Compatible with all creality 3D machines like ender 3, cr10 series and many RepRap machines 

From:

₹160

Book Now
300 x 300 size heater bed DC for 3D prin

300x300 mm size DC heated Bed for 3D Printer

  • 300x300 mm size 

  • With Glue adhesion to stick to surfaces

  • 300-watt max rating 

  • 24Volt DC 

  • Can reach up to 120 C 

From:

₹ 1950

Book Now
200x200 size 3d printer heat bed .jpeg

200 x 200 mm size DC Heated Bed for 3D Printer

  • 200x200 mm size 

  • With Glue adhesion to stick to surfaces

  • 300-watt rating 

  • 24Volt DC 

  • Can reach up to 120 C 

From:

₹ 1300

Book Now
20 tooth gt2 timing pully.jpg

20 Teeth GT2 Timing Pulley 5mm Bore For 6mm Belt For 3D Printer Reprap

  • 5mm bore

  • 6mm width belt

  • 20 tooth timing pulley

From:

₹100

Book Now
20 tooth gt2 timing pully 8mm bore.jpg

20 Teeth GT2 Timing Pulley 8mm Bore For 6mm Belt For 3D Printer Reprap

  • 8mm bore

  • 6mm width belt

  • 20 tooth timing pulley

From:

₹ 100

Book Now
bottom of page