top of page
AKAR
200 IDEX
Doubling productivity while halving costs"
Dual Extrusion System
Dual-extrusion system capable of printing Engineering filaments with dedicated support material.
AC Heated Bed
300x300mm size AC silicon heater will ensure faster heating.
Reached 100 °C in just 4 minutes
Range of Filaments
PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon
Fiber Infused / Metal Fill / Wood Fill
Power Loss Print
Resume Feature
Never lose a print due to accidental
Power loss.
Just turn the machine back on and the
the printer will ask you to continue the print
Filament Run-out
Sensor
When the filament over the printer will
give an alarm and pauses the and the
printer.
Worry-free printing experience
Print end-use parts
made of Engineering grade polymers like ABS, ASA, PCABS, PP, Carbon fibre, glass
filled. HIPS, Nylon and
Polycarbonate(PC) materials, and more…
For Example Polycarbonate (PC)
is having exceptional strength,
resistance to breaking and most
acids.
Nylon is an ideal choice for
structural components with
good chemical and thermal
resistance.
Heated Bed can Reach 120°C
and Nozzle 300°C
High bed temperatures are important for ensuring first layer adhesion,
preventing warping, and improving interlayer bonding.
Remote Monitoring and
Printing (optional)
Manage your printer remotely via network.
Monitor your prints through an inbuilt camera inside the printer.
Air Filtration
System (optional)
Remove nanoparticles from the
inhalation
Safe environment
Industrial Linear Guide Tail System
The printer is equipped with a linear rail system that can give highly accurate parts.
This system also helps in accurate gear feeding and printing at very high speeds.
Internal Filament Drying
Storage
AKAR 300 PRO comes with an internal filament storage unit.
This will help to keep the ABS, PC, and Nylon materials from absorbing the moisture from the air and make the
printing process more reliable.
Highly Stable
The whole body is made up of a thick
steel body which helps the user to
print at very high speeds with any
vibrations.
Our Printers are made with an
intention to run for more than 30000
hours of printing time i.e: almost 9 years
Silent Stepper Motor Drivers
The Printer is equipped with an
advanced 32bit controller board with
TMC 2209 stepper motor drivers.
This enables the printer with very
little noise while the printing process
is going on.
Printer Technical Specifications
bottom of page